The mark consists of a three-dimensional configuration for a wheel rim design. The wheel rim design has five multi-prong spokes, each with two arms radiating from a center of the wheel rim to its outer rim, which tapers at each end of the spokes on the outer edge of the rim. The arms of each spoke end in a diamond-like shape at the center of the wheel rim, and between each spoke is a rectangle-like shape with its body concave in shape and with its lengths slightly curving outward toward the adjacent spokes and with its widths curving inwards toward the concave portion of the rectangular shape. Each spoke has a concave curvature, with such concave curvature being inward toward the center of the wheel rim with an approximate curvature of up to approximately 50 degrees, and with the direction of such concave curvature also indicated by the broken line arrow. Along the inner side of each arm of each spoke is a continuous indented red color lining starting on one end of the arm of each spoke at the outer rim edge and continuing around down the arm of the spoke, around the diamondlike shape, down the other arm of the spoke, and ending at the outer rim edge. Behind the spokes is a raised inner red color rim, followed by a plurality of decorative rivets located around a red color inner circumference portion of the wheel rim. Dotted lines indicate elements not claimed as features of the mark. The shading in the drawing is to further illustrate curvature of the wheel rim design and is for illustrative purposes only.