The mark consists of There are two parts to this logo, the left side, which is the logo design, and the right side, which is the company name. There are three parts to the design on the left of the logo, the top, middle, and bottom parts. In the first part, there are three parallelograms, all of which have the same height. The first parallelogram has a horizontal length two times the height and slants upwards (left to right) at a 20-degree angle. The left side of the second parallelogram is fully attached to the right side of the first parallelogram. It has a horizontal length that is 0.375 times the height and slants downwards (left to right) at a 50-degree angle. The left side of the third parallelogram is fully attached to the right side of the second parallelogram. It has a horizontal length 0.75 times the height and slants upwards (left to right) at a 20-degree angle. The middle part of the logo is similar to the top part in terms of slated degrees, except the lengths of both the first and third parallelograms have shifted to both become 1.5 times the height. The bottom part of the logo is also similar to the top and middle parts in terms of slanted degrees, except the lengths of the first and second parallelogram differ. The horizontal length of the first parallelogram is 0.75 times the height, and the horizontal length of the third parallelogram is 2 times the height. The three parts are put on top of one another and lined up on the sides. It makes use of positive and negative space to create an illusion of floor levels of a building that gradually shrinks in size as it goes up. The second part of the logo is the right side, which consists of three parts, the top, middle, and bottom. The top part consists of the word FRENSCO in Bruel Grotesk B Black font. The middle part consists of a thick straight line that runs horizontally under the word FRENSCO. The third part consists of the words BUILDING PRODUCTS which is also in Bruel Grotesk B Black font and centered under the horizontal line.