The mark consists of a diamond shape with rounded corners and rounded-out edges. It contains a black border that is thicker on the bottom two edges of the diamond as compared to the thinner edges at the top of the diamond. The inside filler color of the logo is a bright red with white lettering "AAG". The three letters together are rotated approximately 45 degrees clockwise from standard print as if the logo was a square tipped onto its bottom right corner. Reading left to right, the first "A" is the largest letter in the logo with the bottom left leg of the letter cut off by the top left edge of the black border and the very tip of this "A" is cut off by the top right edge of the black border near the corner of the diamond. Next in the letter sequence is the second "A" which is the smallest letter and sits in the upper right side of the diamond. This "A"'s bottom left leg is connected to the upper right side of the first larger "A" and its bottom right leg is sitting on top of the letter "G". The upper tip of the smaller "A" is cut off by the top right edge of the black border. The last letter in the right to left progression is "G" which is located in the bottom corner of the diamond. The left side of the "G" connects with the right side of the first large "A". The "G" sits just above the foot of the bigger "A" and under the bottom right leg of the smaller "A". The very right side of the letter "G" touches the black border on the bottom right edge of the diamond.